1、命令方式配置snmp

配置trap事件，故只需要使用一个命令就是snmpconfig这个命令，这个命令的格式如下

Usage: snmpConfig  [--show | --set | --default] [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | secLevel]

我这里设置snmpv1版

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmpconfig --set snmpv1

SNMP community and trap recipient configuration:

Community (rw): [Secret C0de] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0] 0

Trap recipient Port : (0..65535) [162] 

Community (rw): [OrigEquipMfr] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0]  

Trap recipient Port : (0..65535) [162] 

Community (rw): [private] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0] 

Trap recipient Port : (0..65535) [162] 

Community (ro): [public] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0] 

Trap recipient Port : (0..65535) [162] 

Community (ro): [common] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0] 

Trap recipient Port : (0..65535) [162] 

Community (ro): [FibreChannel] public

Trap Recipient's IP address : [0.0.0.0] 10.0.1.83

Trap recipient Severity level : (0..5) [0] 

Trap recipient Port : (0..65535) [162] 

Committing configuration.....done.

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

这里已经显示配置完成！

再使用发送命令进行测试：

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmptraps --send -ip_address 10.0.1.83

Number of traps sent : 21

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

发送完成，如果不配置直接使用以上命令，那就会出现以下错误

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmpTraps --send  -ip_address 10.0.1.83

Trap receiver ip address not configured: 10.0.1.83
 

2、图形化配置snmp方式

登录交换机；
点击“Switch Admin”，打开管理窗口之后选择“Show Advanced Mode”；






选择“SNMP”选项卡；然后根据实际需要配置SNMP的团体信息；



Community String，指团体名称；

Recipient，指接收IP地址，即网管服务器地址；